alert pendants
For example, the first open slot 802 may be aligned
with and parallel to a longitudinal edge of the elongated mounting plate 800, and the second open slot 804 may be oriented to be perpendicular with the longitudinal edge. Each of the first and second open slots 802 and 804 is configured to receive a body of a fastener e. g. , a screw and block an enlarged head of the fastener. Each of the first and second open slots has a respective width that is larger than a first width of the body of the fastener and smaller than a second width of the enlarged head of the fastener. When the mounting plate 800 is being
mounted to a surface, the respective fasteners are fastened onto the surface via the first and second open slots, thereby holding the mounting plate 800 between the enlarged heads of the fasteners and the surface.
alarm home
In some implementations, the video source 501 implements two parallel upload connections, one for uploading the continuous video stream
captured by the camera 118 or 106, and the other for uploading video
portions corresponding to detected motion event candidates. At any given time, the video source 501 determines whether the uploading of the continuous video stream needs to be suspended temporarily to ensure that sufficient bandwidth is given to the uploading of the video segments corresponding to newly detected motion event candidates. As shown in FIG. 5, the video source 501 includes a camera 118 or 106, and an optional controller device. In some implementations, the camera 118 or 106 includes sufficient on board processing power to perform all necessary local video processing tasks e. g.
home security companies atlanta
2. While we are on motion sensitivity, out of the box the motion sensor is way too sensitive. There website says if someone lingers by the door for 10 seconds before sending you a push notification. But as soon as we were
stepping out of the door it would go off. Both our original and replacement unit had this issue. Also, the unit was picking up cars driving by on a road 50 feet away from our house or changes in lighting shadows moving in the distance. After the first day of receiving 6 notifications in under an hour, we had to turn off one of the advertised features. Luckily, a few weeks later they added the ability to adjust the sensitivity and I just so
happened to have an iPhone in a drawer, and I was able to use the iOS app to put it on low. Now we don't get any notifications from the motion sensor. Now that I think about it, I am actually concerned if it is working at all on low. We have packages delivered and such and I haven't had any notifications since making the adjustment.